Peripheral Port Interfacing (PPE & PDA)

The PPE and PDA are used with either IviumStat or CompactStat to provide easy access to the additional Peripheral I/O which both units include. The Peripheral Port Expander is a high integrity but passive interface whilst the Peripheral Differential Amplifier provides high impedance differential inputs useful for connecting pH electrodes etc.

Both are used for driving, monitoring and triggering from real-world signals. Internal conversion functions can then be applied to interpret these in real quantities such as Temperature, Pressure, RPM, Drop Rate etc.

The PPE specs are summarized in the table on the left. Note — The PDA differs in that its 8 analogue inputs provide –2 to +2V differential inputs with > 1012 Ω input impedance. This can also be floating +/-V vs common.


  8 Analogue O/P (0-4V, 16 bit)
  2 Analogue I/P (0-4V 16 bit)
  2 Dig In.
  3 Dig Out
  AC Out (10uHz to 2MHz, programmable volts)
  X/Y Inputs (+/-4V)
News
STOP PRESS - February 2011: World-leading fuel cell test systems from Scribner Associates Inc. scribner
Alvatek Ltd and Scribner Associates Inc. have signed an exclusive distribution agreement under which Alvatek will sell and support Scribner’s test platforms in the UK. Scribner’s fuel cell test systems are already successfully in use in the UK in both university research and fuel cell manufacturers and in particular the 850e range of fuel cell test systems and 890-series of loads. Details will be added to the Alvatek website however, in the meantime, you can get more details by following this link or by contacting Steve Fryatt at Alvatek directly on 01666 500991.