Electrochemistry, Fuel Cell & Battery Research Test Solutions
The VC-2 Voltammetry Cell assembly (MF-1052) can be used to hold the test sample and BASi® electrodes when a C-3 Cell Stand is not available. The Teflon® top includes a platinum wire auxiliary electrode with gold connecting pin. This electrode can be removed and replaced if it becomes worn. BASi® reference and working electrodes (ordered separately) fit into holes in the top. Both these electrodes are positioned in the vial by use of the O-rings which accompany them. The vial can hold 10-20 mL of sample solution. Teflon tubing for a gas purge/blanket line is also provided.
If you are sample-limited, a special MicroVolume Voltammetry Cell (MF-1065) is available for sample volumes as small as 50 µL. The VC-2 cell shown is modified to include a glass vessel with a salt bridge, in the position normally occupied by the voltammetry working electrode. The small volume sample is placed in this glass vessel and a small (MCPE) carbon paste working electrode is lowered into the vessel. The vessel is then placed in a larger vial, together with the reference and auxiliary electrodes. The package includes the carbon paste electrode, carbon paste, the reference and auxiliary electrodes, as well as both glass vessels.
VC-2 Voltammetry Cell Kit
Glass Cell Vials (7) (MR-5255)
Teflon Cell Top with Platinum Wire Auxiliary Electrode
1/16" Teflon Tubing
|MF-1083||Replacement Cell Vial (12 each)|
|MR-5255||Replacement glass cell vial for VC-2|
|CF-1010||Carbon paste (1g)|
|MF-2052||Ag/AgCl reference electrode|
|MW-4130||Replacement Platinum Wire Auxiliary Electrode with Gold-Plated Connector|
|MF-1065||MicroVolume Voltammetry Cell, with one glass sample vessel, one glass vial, Teflon top, inert gas purge line, MCPE carbon paste voltammetry electrode, carbon paste, platinum wire auxiliary electrode, Ag/AgCl reference electrode, and manual|