IviCycle - High channel count Cycler with EIS per channel.

  • Multi-channel battery test system
  • Multipotentiostat system – 5 electrodes inc Reference Electrodes.
  • C030: 8 channels, each channel: ±30mA / 10V
  • C200: 8 channels, each channel: ±200mA / ±10V
  • FRA/EIS: 10µHz-20kHz on each channel for simultaneous testing.
  • 19″ rack-mountable housing.
  • Internal uDataSecure –  experiment can run without PC.
  • Optional temperature input per channel.

Description:

Dedicated battery test system

IviCycle is designed to be your perfect partner for high channel-count battery applications. It offers a low cost-per-channel, high volume testing solution and integral extensive data storage capability

 

Complete solution

The IviCycle is a multi-channel test system with optional impedance capability. The channels are divided over 4 x 8 channel modules which can be a mix of the different IviCycle modules to create the desired number of channels with varying compliance.

The C200 modules each have 8 channels of ±200mA/±10V compliance, the C030 have ±200mA/±10V. Modules are available either as a DC version (no EIS), or as an EIS version with impedance capability on each of the channels. This means that simultaneous/parallel impedance measurements are possible on all channels. The IviCycle has an integrated DataSecure module that stores all data for each channel completely independently from the computer. This ensures that if there is a communication loss or a computer crash/update, the measurement will continue and data will not be lost and so gives peace-of-mind for long duration, high throughput testing. The IviCycle unit is built into a 19inch rack mountable housing for easy incorporation into existing storage racks, or as a stand-alone bench-top multi-channel system.

Safety

The maximum current or potential of the instrument can be defined by the operator. Thus valuable samples may be protected, and unsafe situations prevented.

Data security & Connection

The IviCycle is equipped with an integrated DataSecure module:

  • Data is stored on board independent of the computer.
  • Connection of multiple PCs is possible

Software

The IviCycle is controlled via Ivium’s own software, IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, etc. The IviCycle can also be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of software is included as standard with each instrument.

  • Control of separate channels individually
  • All channels simultaneously
  • Synchronous start
  • Data from different channels plotted individually or in 1 single gra

Software:

The IviCycle can be controlled using Iviums own software (IviumSoft). The software allows you to control the instrument, data management and the analysis of the data collected. If you choose to use other software it can controlled using LabVIEWTM, C++, Delphi etc. The IviCycle comes with a full software which is included with each instrument.

  • Control of separate channels individually
  • All channels simultaneously
  • Synchronous start
  • Data from different channels plotted individually or in 1 single graph

Specifications:

Performance  
Current compliance±30mA
Maximum output voltage±10V
Electrode connections4; WE, CE, RE, S with 4mm banana plugs
Potentiostat bandwidth>500kHz
Stability settingsHigh Speed, Standard and High Stability
Signal acquisitionDual channel 16bit ADC, 100,000 samples/s
Channel combinationNo

 

Potentiostat 
Applied potential range±10V, 0.333mV res.
Applied potential accuracy0.2% or 1mV
Current ranges±10nA to ±100mA
Measured current resolution0.015% of current range, minimum 1pA
Measured current accuracy0.2%

 

Galvanostat 
Applied current resolution0.033% of applied current range
Applied current accuracy0.2%
Potential ranges±10mV, ±100mV, ±1V, ±10V
Galvanostatic current ranges±10µA to ±100mA
Measured potential resolution0.003% of potential range, minimum 400nV
Measured potential accuracy0.2% or 1mV

 

Impedance Analyser 
Frequency range10µHz to 20kHz
Amplitude0.15mV to 1.0V, or 0.03% to 100% of current range
DC offset16bit DC offset subtraction and 2 DC-decoupling filters

 

Electrometer 
Input impedance>1000Gohm //<20pF
Input bias current<20pA
Bandwidth>5MHz

 

Connections 
Analog in/out16bit analog input

 

Instrument 
InterfacingUSB/LAN (Ethernet)
Size (w x d x h)44 x 26 x 22cm
Weight12.5kg
Integrated DataSecureData acquisition time: 2ms minimum, Stored no. of data points: 20M each channel