Peroxidase Redox Polymer Wired Enzyme Electrode Kit
Conventionally, the electrochemical determination of hydrogen peroxide has been used to selectively measure acetylcholine, choline, glucose and lactate in diverse biological samples. The target analyte is separated using a microbore or cartridge chromatography column. The analyte then passes through an analyte-specific, oxidase enzyme bound to a post-column immobilized enzyme reactor (IMER) that produces the H2O2 which is then detected downstream at the surface of a working electrode in the electrochemical detector’s cell.
Platinum electrodes are frequently utilized because they are more selective for H2O2 than standard glassy carbon electrodes. A glassy carbon electrode would have to operate at a much higher applied potential to detect peroxide and would also respond to all of the other electroactive components in the sample. However, platinum requires long equilibration times after cleaning or system changes.
A New Approach
The new wired enzyme electrode (WENZ) offers several advantages vs. the platinum electrode. It exhibits improved sensitivity, better detection limits and improved operational stability. Initial stabilization of the background current is significantly faster than for a conventional platinum electrode. A redox polymer film containing horseradish peroxidase (HRP) is coated on the surface of a glassy carbon electrode. The redox polymer electrically “wires” the peroxidase enzyme to the electrode. It operates at a lower applied potential than a platinum electrode (+ 100 mV vs. Ag/AgCl) and electrochemically reduces hydrogen peroxide generated by a post-column IMER. This enhanced sensitivity is demonstrated in the chromatograms below.
Chromatograms of (a) Ringer’s solution and (b) 0.5 nmole lactate using (left) platinum electrode and (right) wired peroxidase electrode.
Chromatograms of 1 nmole glucose (G), 0.23 nmole ascorbic acid (AA) and 0.24 nmole uric acid (UA) on a bare platinum electrode (left). The use of the wired peroxidase electrode (right) effectively increases response.
The wired enzyme electrode is offered in kit form. The kit provides a means of preparing and regenerating the electrode for minimal cost. Kits are available in two formats, according to the style of BASi® electrochemical detector being used. Customers already using a BASi® applications kit based on an oxidase IMER will find it very easy to upgrade to the new wired enzyme electrode format.
Chromatograms of 0.5 pmole acetylcholine and choline with (left) platinum electrode and (right) wired peroxidase electrode.
- Peroxidase redox polymer coating solution
- Two working electrodes (cross-flow or radial-flow)
- 1 µL dispensing syringe
- Surfactant solution
- Thin-layer cell gaskets
- Storage base and cover
- Cold packs
||Peroxidase Redox Polymer Kit: for Cross-Flow Cell Design
||Reagent refill for either kit
||Peroxidase Redox Polymer Kit: for Radial-Flow Cell Design
||Reagent AAO acid washed alumina