Specialists in Electrochemistry & Materials, Energy & Power

Test & Measurement

Includes test and measurement instruments, systems and associated modules.

ivicycle-c030-1024x1024-1

IviCycle

32 independent potentiostat / cycler channels each with impedance / EIS.  Modules from 30mA to 3A and to ±10V. Systems can be combined to 256 channels.

Ivium Technologies

c16000-1024x1024-1

IviCycle C16000

Regenerative battery cycler offers 16-channels with ±16A per channel and ±5V (or -1 to +9V).  The regenerative design minimises heat dissipation, energy consumption and space required to house the system.

Ivium Technologies

ivium-he80-1024x683-1

Ivium HE80

Single or four quadrant 20V, 80A potentiostat with integrated FRA/EIS and designed with electrolysers/hydrogen generation, battery cycling, and electrodeposition in mind.

Ivium Technologies

ivium-xp40-1024x1024-1

Ivium XP High Power Potentiostats

The Ivium XP range addresses applications requiring a high current compliance such as electrolyser, battery and fuel cell applications. The range extends to ±40A and ±20V in 3 models, the XP10, XP20, and XP40.

Ivium Technologies

Categories:

iviumboost-family-1024x1024-1

IviumBoost Family of Power Boosters

Add capability to your Ivium potentiostat to meet demands of your expanding research. Models available covering a range up to 500A and 100V.

Ivium Technologies

Categories:

Categories: |

lps-1024x1024-1

LPS-HR Test Systems

With 24Bit resolution and current ranges configurable between 100µA to 60A per channel (parallelable to 4x) and voltage to 70V, this system replaces BaSyTec’s MDS, GSM and LPS models.

BaSyTec

Categories:

Categories: |

hps-hr-1024x1024-1

MRS-HR Cell Test System

Regenerative multichannel regenerative cycler delivers up to 1000A (2,400A in parallel operation) up to 6V.

BaSyTec

Categories:

mrs-module-tester-1024x1024-1

MRS-HR Module Test System

Regenerative test system offering voltages to 80 V and currents to 540A (1500A in parallel operation) delivered by a modern switched mode design ensures high energy efficiency with reduced cooling required to run this system.

BaSyTec

Categories:

Categories: |

nanocycler-all-products-1024x1024-1

NanoCycler – Battery Cycler

A compact, easy-to-use high density and multichannel 200mA battery cycler designed to test standard 2032 and 2025 coin cells (also lower power pouch cells) in the laboratory environment.

Nanobase

Categories:

new_energy_lab

New Energy Lab

Fully equipped energy laboratory with outdoor generators and solar cells. Customised and installed to client requirements.

Heliocentris

Categories:

octoboost16000-1024x1024-1

OctoBoost16000

8-channel booster with EIS over 10µHz-10kHz and 16A per channel, parallelable up to 128A.  For use with OctoStat or Ivium single channel potentiostats used either singly or with multiple single channel instruments.

Ivium Technologies

octostat5000-1024x1024-1

OctoStat Series

8-channel Cycler/Potentiostat/Galvanostat/ZRA, stackable to 128 channels each with independent FRA/EIS.  To 15A/128A with OctoBOOST.  30mA, 200mA, 5A versions.  Runs and saves data without pc controller.

Ivium Technologies

Categories:

origabatt-frontleft-1024x1024-1

OrigaBatt Multichannel Battery Cycler

NEW! 10-channel, regenerative cycler with 250mA / 11V, EIS and simultaneous full & half cell measurements per channel.

Origalys

Categories:

OrigaMeter-OpH218-Jeulin

Origameter Bench pH Meter

Laboratory pH meter. This is compatible with the, now obsolete, pH electrodes and tips from Radiometer.

Origalys

Categories: |

pat-tester-i-16-1024x1024-2

PAT-Tester-i-16

Combination multi-channel potentiostat, temperature chamber and El-Cell’s patented PAT-Cell design for cable-free connections to each cell.

El-Cell

Categories:

Categories: |

pat-tester-x-8-diagram

PAT-Tester-x

Combination multi-potentiostat and El-Cell’s patented PAT-Cell design for cable-free connections to each of up to 8 independent PAT cells for battery materials research and testing.

El-Cell

Categories:

Categories:

pts-1-1024x1024-1

PTS-1 Fuel Cell Test Station

A modular, 100W fuel cell test system from Lean-cat suitable for testing of short stacks and single cells.  

LeanCat