Specialists in Electrochemistry & Materials, Energy & Power

PAT-Stand-16

The PAT-Stand-16 is the docking station for up to 16 PAT-Cells in 4 x 4 matrix. The PAT-Stand-16 has a built-in data logger recording full and half cell voltages, cell current, tray temperature and time. The PAT-Stand-16 can be connected permanently to a usual multi-channel potentiostats (such as those from Biologic or Ivium) or battery […]

ECC-CellLoad

Electrode alignment and assembly tool When building full cells with thin Celgard type separators, the concentric alignment of the two electrodes – with the oversized separator in between – is the key for electrochemical performance and life time. The ECC-CellLoad is the tool to get that done easily. This tool is suitable for test cells […]

ECC-RefLoad

Tool for loading reference materials such as lithium metal into ECC-Opto-Std, ECC-Opto-SBS and ECC-Aqu test cells. Basically, the tool is a small tube (cannula) with a knock-out pin inside. A tiny piece of lithium metal is first picked up by pressing the cannula onto a piece of lithium foil (>0.2 mm thick). The cannula is […]

PAT-Stand-1

The PAT-Stand-1 is a docking station, which runs a single PAT-Cell or PAT-Cell-Press. It can be connected directly to a common multi-channel potentiostat (such as those from Ivium or PalmSens) or battery testers (like Ivium or BaSyTec) using 4mm banana sockets or a hardwired Sub-D socket. Therefore, the PAT-Stand-1 saves wiring effort, because it is […]

EL-Cell Metal Seal Mounting Kit

Tool kit for using metal seals in PAT series test cells EL-CELL offers metal sealing rings for PAT series test cells for highest demands on cell tightness. This tool kit is designed to ensure the correct installation when using these metal seals. The handy assembly block holds the cell in place, while the torque wrench […]

PAT-Cell

Cableless test cell for high-throughput testing of Li-ion battery materials using the innovative PAT-Core concept.

PAT-Cell-Twin-Ref

Specialized PAT-Cell for testing simultaneously with two reference electrodes.

PAT-Cell-HT

Heat resistant PAT series test cell for up to 200°C

PAT-Cell-Gas

PAT-Cell for in-situ gas analysis in a flow-through set-up