IviumBoost Family of Power Boosters
Each member of the IviumBoost family is used to boost the power of compatible Ivium potentiostats and with capabilities up to 500Amps and 100V (see table for details.) Each is a separate external instrument with full potentiostat-galvanostat-ZRA capability and, for the high current and high voltage models, inbuilt safety circuitry and interlocks. Each can be […]
OctoBoost16000
The OctoBoost16000 offers a flexible high current solution for both the OctoStats or Ivium single channel instruments. In combination with an OctoStat, adjacent 16A channels on the booster can be combined to give a variable max current up to 128A (e.g. 8 x ±16A, 4 x ±32A, 2 x ±64A, 1 x ±64A and 4 […]
StackAnalyser
When used with a compatible Ivium potentiostat, the StackAnalyser module allows the simultaneous recording of up to 8 differential bipolar high-ohmic voltages (e.g. pH meter), or 8 simultaneous EIS measurements up to 100kHz in addition to the primary signal. It is designed to be used in combination with an Ivium potentiostat to monitor individual cells […]
AirCell and AirCell-HT
Research and development of fuel cells and electrolysers requires many experiments to be carried out under various conditions. Leancat AirCells offer repeatable and well-controlled conditions as well as high durability thanks to their robust and clean design. Compression hardware for single-cell testing Suitable for high-temperature PEM fuel cells or electrolysers Compression system uses pressurized gas […]
BT-11x Membrane Conductivity Hardware
BT-11x Membrane Conductivity Hardware: Use the BekkTech Conductivity Cell or Clamp to obtain in-plane ionic conductivity data on your bare membrane sample. BT-110 Conductivity Clamp: The BT-110 Conductivity Clamp is used to obtain in-plane resistance and ionic conductivity of bare ionomer membrane samples. The Conductivity Clamp is designed to be used in a humidity chamber […]
Electrolysis Cell Fixture
Scribner’s Electrolysis Cell Fixture is specifically designed for their 600 / 620 Water Electrolysis Test Stations. Choose Red or Blue End-Plates – Both use the Pt-Ti flow field on the Positive Side and Graphite flow field on the Negative Side. The difference is in the End-Plates: Blue End-Plates are suitable for DI water Red End-Plates […]
Laboratory Electrolyzer Cell
Research and development of fuel cells and electrolysers requires many experiments to be carried out under various conditions. The Leancat Electrolyzer laboratory cell offers repeatable and well-controlled conditions as well as high durability thanks to its robust and clean design. Test hardware for MEA and porous layers Suitable for PEM or AEM electrolyzers Possibility to […]
Laboratory Electrolyzer Stack
Research and development of fuel cells and electrolysers requires many experiments to be carried out under various conditions. Leancat Electrolyzers laboratory stacks offer repeatable and well-controlled conditions as well as high durability thanks to its robust and clean design. Test hardware for multi-cell testing Testing up to 5 cells at the same time. Suitable for […]
ETS-10 Electrolyzer Test Station
The ETS-10 system from LeanCat is a modular, multi-kW electrolysis test station from LeanCat. It is configurable to individual requirements and suited to high pressure PEM or AEM applications. Key features include: User-Friendly manual operation with P&ID visualization or automated operation using in-house developed Python library Ability to perform a wide range of tests, including […]
ETS-1 Electrolyzer Test Station
A modular 1kW water electrolysis test station from LeanCat, the system is configurable to individual requirements and suited to high pressure PEM or AEM applications. Features include: User-Friendly manual operation with P&ID visualization or automated operation using in-house developed Python library Ability to perform a wide range of tests, including JRC standard performance curve, H2 crossover, […]