Battery Test & Measurement Solutions
Categories: Test & Measurement
Categories: Battery Test|Cell Test
Cell Test System (CTS)
32 independent 5A/6V test channels each with 200nA precision and temperature input).
BaSyTec
Categories: Test & Measurement
Categories: Battery Test|Cell Test
XCTS Mk2 Series
To 20 channels each with 6V / 80A (800A in parallel mode. Energy recycling and regeneration.
BaSyTec
Categories: Test & Measurement
Categories: Battery Test|Cell Test
LPS-HR Test Systems
With 24Bit resolution and current ranges configurable between 100µA to 60A per channel (parallelable to 4x) and voltage to 70V, this system replaces BaSyTec’s MDS, GSM and LPS models.
BaSyTec
Categories: Multichannel|Potentiostat|Test & Measurement
Categories: Battery Test|Cell Test|Impedance
IviCycle
32 independent potentiostat / cycler channels each with impedance / EIS. Modules from 30mA to 3A and to ±10V. Systems can be combined to 256 channels.
Ivium Technologies
Categories: Multichannel|Potentiostat|Test & Measurement
Categories: Battery Test|Cell Test|Impedance
IviCycle C16000
Regenerative battery cycler offers 16-channels with ±16A per channel and ±5V (or -1 to +9V). The regenerative design minimises heat dissipation, energy consumption and space required to house the system.
Ivium Technologies
Categories: Multichannel|Potentiostat|Test & Measurement
Categories: Battery Test|Cell Test|Impedance
OctoStat Series
8-channel Cycler/Potentiostat/Galvanostat/ZRA, stackable to 128 channels each with independent FRA/EIS. To 15A/128A with OctoBOOST. 30mA, 200mA, 5A versions. Runs and saves data without pc controller.
Ivium Technologies
Categories: Test & Measurement
Categories: Battery Test|Cell Test|Impedance
OrigaBatt Multichannel Battery Cycler
NEW! 10-channel, regenerative cycler with 250mA / 11V, EIS and simultaneous full & half cell measurements per channel.
Origalys
Categories: Battery Test|Cell Test
PAT-Tester-i-16
Combination multi-channel potentiostat, temperature chamber and El-Cell’s patented PAT-Cell design for cable-free connections to each cell.
El-Cell
Categories: Test & Measurement
Categories: Battery Test|Cell Test
PAT-Tester-x
Combination multi-potentiostat and El-Cell’s patented PAT-Cell design for cable-free connections to each of up to 8 independent PAT cells for battery materials research and testing.
El-Cell
Categories: Test & Measurement
Categories: Battery Test|Cell Test
NanoCycler – Battery Cycler
A compact, easy-to-use high density and multichannel 200mA battery cycler designed to test standard 2032 and 2025 coin cells (also lower power pouch cells) in the laboratory environment.
Nanobase
Categories: Test & Measurement
Categories: Battery Test|Cell Test
MRS-HR Cell Test System
Regenerative multichannel regenerative cycler delivers up to 1000A (2,400A in parallel operation) up to 6V.
BaSyTec
Categories: Test & Measurement
Categories: Battery Test|Cell Test
HPS-HR Test Systems
Voltage and currents can be adapted to your requirements in this modular system with up to 2400A and 70 V (max 6 KW ) in this modular, 4-channel design.
BaSyTec
Categories: Test & Measurement
Categories: Battery Test|Module and Pack
RPS Battery Pack Test System
Regenerative system offering voltages to 1500V and currents up to 1000A at a maximum power of 500kW. A Battery safety (BSD) is integrated in the system and many additional options are possible.
BaSyTec
Categories: Test & Measurement
Categories: Battery Test|Module and Pack
MRS-HR Module Test System
Regenerative test system offering voltages to 80 V and currents to 540A (1500A in parallel operation) delivered by a modern switched mode design ensures high energy efficiency with reduced cooling required to run this system.
BaSyTec
Categories: Potentiostat|Single Channel|Test & Measurement
Categories: Battery Test|Electrolyser Test|Fuel Cell Test|Impedance
Ivium XP High Power Potentiostats
The Ivium XP range addresses applications requiring a high current compliance such as electrolyser, battery and fuel cell applications. The range extends to ±40A and ±20V in 3 models, the XP10, XP20, and XP40.
Ivium Technologies
Categories: Potentiostat|Single Channel|Test & Measurement
Categories: Battery Test|Electrolyser Test|Fuel Cell Test|Impedance
Ivium HE80
Single or four quadrant 20V, 80A potentiostat with integrated FRA/EIS and designed with electrolysers/hydrogen generation, battery cycling, and electrodeposition in mind.
Ivium Technologies
Categories: Battery Test
Temperature Control Module for Pouch Cell Holder
Maintains test cell at stable isothermal conditions from ~10°C below ambient to 60°C
Wattcrafts
Categories: Cells and Fixtures|Shop
Categories: Battery Test
Pouch Cell Holder – A7
Standard holder for pouch cells up to 80x110mm (A7) and 5kN force
Wattcrafts
Categories: Cells and Fixtures|Shop
Categories: Battery Test
![[PCH_S_CB] Pouch Cell Holder - Complete (standard)](https://www.alvatek.co.uk/wp-content/uploads/elementor/thumbs/PCH_S_CB-Pouch-Cell-Holder-Complete-standard-run0xtkxln1bkm9ygtrcsld8k3ra5qczl9fhv1dmgw.webp "[PCH_S_CB] Pouch Cell Holder – Complete (standard)")
Pouch Cell Holder – Complete
Wattcrafts
Categories: Cells and Fixtures|Shop
Categories: Battery Test
Pouch Cell Holder
Standard holder for pouch cells up to 80x80mm and 5kN force
Wattcrafts
Categories: Cells and Fixtures|Shop
Categories: Battery Test|Cell Test
CompreCell Pouch
Innovative fixture for testing pouch cells at different stack pressures and temperatures (to 75kN / 100 °C
RHD Instruments
Categories: Shop|Test & Measurement
Categories: Battery Test
CompreDrive
Automated test station for studying cells under active pressure and temperature control
RHD Instruments
Categories: Cells and Fixtures|Shop
Categories: Battery Test|Cell Test
CompreFrame
Pressure frame for studying solid-state electrolytes, solid-state batteries, and small pouch cells under pressure and temperature control.
RHD Instruments
Categories: Cells and Fixtures|Shop
Categories: Battery Test|Cell Test
ComprePouch
A versatile stand-alone pouch cell fixture for testing pouch cells
RHD Instruments
Categories: Test & Measurement
Categories: Battery Test|Electrolyser Test|Fuel Cell Test|Impedance
IviumBoost Family of Power Boosters
Add capability to your Ivium potentiostat to meet demands of your expanding research. Models available covering a range up to 500A and 100V.
Ivium Technologies
Categories: Test & Measurement
Categories: Battery Test|Cell Test|Electrolyser Test|Impedance
OctoBoost16000
8-channel booster with EIS over 10µHz-10kHz and 16A per channel, parallelable up to 128A. For use with OctoStat or Ivium single channel potentiostats used either singly or with multiple single channel instruments.
Ivium Technologies
Categories: Multichannel|Multiplexers & Switches|Test & Measurement
Categories: Battery Test|Electrolyser Test|Fuel Cell Test|Impedance
StackAnalyser
Adds simultaneous voltage and EIS measurements to your Ivium potentiostat – great for measuring battery and stack cells simultaneously up to 100kHz in addition to the primary signal.
Ivium Technologies
Categories: Cells and Fixtures|Shop
Categories: Battery Test|Cell Test
Opposite-Tabs-Adapter – Pouch Cell Holder
Electrical connection for pouch cells with tabs on opposite sides
Wattcrafts
Categories: Test & Measurement
Categories: Battery Test|Cell Test
580 & 585 Battery Cyclers
8-channel, 1A and 5A battery cyclers from Scribner. Each includes High Frequency Resistance capability for ac measurement of battery internal resistance.
