PAT-Stand-16
The PAT-Stand-16 is the docking station for up to 16 PAT-Cells in 4 x 4 matrix. The PAT-Stand-16 has a built-in data logger recording full and half cell voltages, cell current, tray temperature and time. The PAT-Stand-16 can be connected permanently to a usual multi-channel potentiostats (such as those from Biologic or Ivium) or battery […]
PAT-Stand-1
The PAT-Stand-1 is a docking station, which runs a single PAT-Cell or PAT-Cell-Press. It can be connected directly to a common multi-channel potentiostat (such as those from Ivium or PalmSens) or battery testers (like Ivium or BaSyTec) using 4mm banana sockets or a hardwired Sub-D socket. Therefore, the PAT-Stand-1 saves wiring effort, because it is […]
PAT-Clamp-1
Docking Station with Minimised Dimensions The PAT-Clamp-1 is our smallest docking station for a single PAT test cell. It was developed for tight space constraints. The socket can be left connected permanently to a common potentiostat or battery tester using 2 mm banana sockets or Sub-D connector. Therefore there is no need to renew the […]
Scribner High Pressure Cell
Introducing Scribner’s High-Pressure Proton Exchange Membrane (PEM) and Anion Exchange Membrane (AEM) Cell Fixture, meticulously crafted to support research that requires 50 bar (725psi) of pressure. This specialized fixture seamlessly integrates with Scribner’s 620 Electrolyzer Test Station and 670 Electrolysis Workstation, enabling your experiment.
PAT-Stand-4
The PAT-Stand-4 is a docking station connecting up to four PAT-Cells to any potentiostat or battery tester. The connection is made via the banana sockets at the side of the PAT-Stand-4. The PAT-Stand-4 saves wiring effort, because it is not necessary to renew the connection between cell and potentiostat for every battery test. If you […]
PAT-Cell-HT
For 2- & 3-electrode testing at elevated temperatures The PAT-Cell-HT is a test cell for 2- and 3-electrode measurements on battery materials at temperatures up to 200°C. It uses the modular PAT-Core concept and can therefore be used for a variety of test purposes. The cell has no wiring but is inserted directly into a PAT battery tester or […]
PAT-Cell
The ideal test cell for high-throughput battery testing. The PAT-Cell is a test cell for 2- and 3-electrode measurements on battery materials. It uses the modular PAT-Core concept and can therefore be used for a variety of test purposes. The cell has no wiring but is inserted directly into a PAT battery tester or connected to any commercially available […]
PAT-Cell-Twin-Ref
The PAT-Cell-TwinRef is a special version of the PAT-Cell which accommodates the use of a second reference electrode. This enables simultaneous measurements using two reference electrodes, for instance with LFP and LTO. Since both ring electrodes are arranged face-to-face, their SOC can be easily adjusted.
PAT-Cell-Gas
For In-Situ Gas Analysis Developed for in-situ gas analysis of battery materials in a flow-through set-up, the PAT-Cell-Gas features a gas inlet and outlet with self-locking couplings that are compatible with 1/16 in. Swagelok tube fittings. Optional built-in pressure sensor or valve port for gas sampling with a syringe are also available. The PAT-Cell-Gas combines […]
PAT-Cell-Press
For testing under pressure The PAT-Cell-Press is a pressure test cell for measuring gas evolution and drawing gas samples (option). Its advanced design includes a laser welded pressure sensor and glass-to-metal seals. The number of non-permanent seals is reduced to its minimum: a single seal between cell lid and base and a ferrule when the […]