OrigaBatt Multichannel Battery Cycler
This premium multi-channel battery cycler for research and development includes 10 independent channels, each with -2 to 11 V, ±250 mA and simultaneous EIS up to 100 kHz. Channels can be combined up to ±2.5 A is possible. The innovative user interface and design offers simultaneous full cell and half cell, 5-electrode voltage measurements. Energy […]
UHPC 20A Channel Module
NOVONIX® UHPC systems use specifically designed channel modules that address a wide range of current measurement, providing the reliable, high precision, and rapid data analysis that our customers value. When used with a properly controlled temperature chamber, these systems can measure cycle metrics such as Coulombic Efficiency with better precision and accuracy than any other […]
UHPC 10A Channel Module
NOVONIX® UHPC systems use specifically designed channel modules that address a wide range of current measurement, providing the reliable, high precision, and rapid data analysis that our customers value. When used with a properly controlled temperature chamber, these systems can measure cycle metrics such as Coulombic Efficiency with better precision and accuracy than any other […]
UHPC 2A Channel Module
NOVONIX® UHPC systems use specifically designed channel modules that address a wide range of current measurement, providing the reliable, high precision, and rapid data analysis that our customers value. When used with a properly controlled temperature chamber, these systems can measure cycle metrics such as Coulombic Efficiency with better precision and accuracy than any other […]
IviCycle C16000
This First Regenerative Battery Cycler from Ivium extends the highly successful IviCycle family of multichannel cyclers. Includes: High energy efficiency regenerative operation Multi-channel battery test system Each channel: ±16A/±5V or -1 to +9V Optional FRA/EIS: 10µHz-20kHz on each channel for simultaneous testing 19″ rack-mountable housing Low cost-per-channel battery test solution Dedicated battery test system The […]
PAT-Tester-x
Up to 8 independent test channels for PAT-series and other test cells Each channel with a fully featured potentiostat / galvanostat / impedance analyzer
PAT-Tester-i-16
The PAT-Tester-i-16 is a state-of-the-art multi-channel battery tester specially developed for the requirements of battery material research. A multi-channel potentiostat combined with temperature chamber and El-Cell’s patented PAT Cell technology for cable-free cell connection make a unique tool for battery research and testing. Already have your own potentiostat? See here for the chamber-only PAT-Chamber-16.
OctoBoost16000
This 8 channel booster offers a flexible high current solution for both the OctoStats or Ivium single channel instruments. Adjacent 16A channels on the booster can be combined to give a variable max current up to 128A (e.g. 8 x ±16A, 4 x ±32A, 2 x ±64A, 1 x ±64A and 4 x ±16A, 1 […]
MRS-HR Cell Test System
The BaSyTec MRS-HR cell test system is designed for testing cells and offers a maximum voltage of 6V and current up to 1000A (2400A in parallel mode). The switched mode design of the amplifier results in a high efficiency, low heat generation and compact design.
MRS-HR Module Test System
The BaSyTec MRS-HR module test system is designed for voltages of up to 80 V and s the typical module size. Maximum currents are customized between 70 A and 540 A (1500A in parallel operatoin). The switched mode amplifier results in low heat generation and high energy efficiency. This also reduces the energy demand for […]