Electrolysis Cell Fixture
Scribner’s Electrolysis Cell Fixture is specifically designed for their 600 / 620 Water Electrolysis Test Stations. Choose Red or Blue End-Plates – Both use the Pt-Ti flow field on the Positive Side and Graphite flow field on the Negative Side. The difference is in the End-Plates: Blue End-Plates are suitable for DI water Red End-Plates […]
Laboratory Electrolyzer Cell
Research and development of fuel cells and electrolysers requires many experiments to be carried out under various conditions. The Leancat Electrolyzer laboratory cell offers repeatable and well-controlled conditions as well as high durability thanks to its robust and clean design. Test hardware for MEA and porous layers Suitable for PEM or AEM electrolyzers Possibility to […]
Laboratory Electrolyzer Stack
Research and development of fuel cells and electrolysers requires many experiments to be carried out under various conditions. Leancat Electrolyzers laboratory stacks offer repeatable and well-controlled conditions as well as high durability thanks to its robust and clean design. Test hardware for multi-cell testing Testing up to 5 cells at the same time. Suitable for […]
EL-Cell Metal Seal Mounting Kit
Tool kit for using metal seals in PAT series test cells EL-CELL offers metal sealing rings for PAT series test cells for highest demands on cell tightness. This tool kit is designed to ensure the correct installation when using these metal seals. The handy assembly block holds the cell in place, while the torque wrench […]
ECC-StopRail
EL-Cut attachment to reduce scrap from cutting. Don’t waste your precious electrode material! When attached to the cutting pliers, the crosshairs of the ECC-StopRail let you precisely target the electrode area. The ECC-StopRail is an optional tool to be attached to the EL-Cut cutting pliers. The ECC-StopRail is a means to conveniently target the cutting area. […]
EL-Cut
High Precision Electrode Cutter Accuracy and reproducibility of electrochemical tests do not solely depend on the choice of materials but also on simple geometric and mechanical parameters. The proper cutting of the electrodes is an often neglected factor. Torn and chipped electrode edges – although invisible to the bare eye – inevitably cause current inhomogeneity […]
ECC-LiPunch
Punching tool for lithium foil Forget about your lithium foil getting stuck to the hollow punch! The ECC-LiPunch is the perfect tool for smoothly punching 18 mm lithium discs for the ECC and PAT series test cells. For punching highly precise and flat lithium discs Standard size for EL-CELL test cells: 18 mm diameter Other […]
PAT-Chamber-16
The patented1 PAT-Chamber-16 combines the high-throughput testing abilities of the PAT-Stand-16 with a temperature-controlled cell chamber. The integrated Peltier device enables you to test at the exact temperature you need, without using an external heat chamber. Furthermore, it is our first high throughput docking station that is capable of utilizing both the PAT-Cell and the PAT-Cell-Press for […]
PAT-Stand-1U
The PAT-Stand-1 U is a single channel docking station compatible with almost any type of PAT-Cell and battery tester/ potentiostat. All connections/ signals of the inserted PAT-Cell are available through the banana sockets at the front of the docking station. This makes the PAT-Stand-1 U the perfect fit for specialized/ customized PAT-Cells such as the […]
PAT-Heater-4
The PAT-Heater-4 is a heated docking station connecting up to 4 PAT-Cell-HT to any potentiostat or battery tester. The working temperature is adjustable from 10°C above ambient temperature up to 200°C. The PAT-Heater-4 saves wiring effort, because it is not necessary to renew the connection between cell and potentiostat for every battery test. However the easy-to-access […]