IviumBoost Family of Power Boosters
Each member of the IviumBoost family is used to boost the power of compatible Ivium potentiostats and with capabilities up to 500Amps and 100V (see table for details.) Each is a separate external instrument with full potentiostat-galvanostat-ZRA capability and, for the high current and high voltage models, inbuilt safety circuitry and interlocks. Each can be […]
OctoBoost16000
The OctoBoost16000 offers a flexible high current solution for both the OctoStats or Ivium single channel instruments. In combination with an OctoStat, adjacent 16A channels on the booster can be combined to give a variable max current up to 128A (e.g. 8 x ±16A, 4 x ±32A, 2 x ±64A, 1 x ±64A and 4 […]
LPS-HR Test Systems
The LPS-HR series from BaSyTec replaces its MDS, GSM and LPS series via its flexible choice of options. The core system is based upon a 24Bit design and offers additional options above and beyond the previous models, including parallel operation and an additional current range. LPS-HR can be configured with current ranges from 100µA to […]
MRS-HR Cell Test System
The BaSyTec MRS-HR cell test system is designed for up to 1000A (2400A in parallel mode). The switched mode design of the amplifier results in a high efficiency, low heat generation and compact design.
HPS-HR Test Systems
BaSyTec Test systems of the HPS-HR series are based on a highly modular amplifier design. Voltage and currents can be adapted to your requirements. Currents up to 600 A, voltages up to 70 V and a maximum power of 6 KW are possible for a single channel. Additionally the power and current can be increased […]
MRS-HR Module Test System
The BaSyTec MRS-HR module test system is designed for voltages of 70 V and fits the typical module size. Maximum currents are customized between 70 A and 540 A. The switched mode amplifier results in low heat generation and high energy efficiency. This also reduces the energy demand for cooling of the battery laboratory.
StackAnalyser
When used with a compatible Ivium potentiostat, the StackAnalyser module allows the simultaneous recording of up to 8 differential bipolar high-ohmic voltages (e.g. pH meter), or 8 simultaneous EIS measurements up to 100kHz in addition to the primary signal. It is designed to be used in combination with an Ivium potentiostat to monitor individual cells […]
Opposite-Tabs-Adapter – Pouch Cell Holder
This attachment for Wattcraft’s Pouch Cell Holder facilitates pressure-controlled battery testing. It excels in both long-term monitoring and quick pressure setting across multiple holders. With easy USB connectivity and included software, it’s ideal for a wide range of experiments – from commercial pouches to cutting-edge solid-state batteries. This module delivers the accuracy and flexibility crucial […]
Force Sensor Module – Pouch Cell Holder
This attachment for Wattcraft’s Pouch Cell Holder facilitates pressure-controlled battery testing. It excels in both long-term monitoring and quick pressure setting across multiple holders. With easy USB connectivity and included software, it’s ideal for a wide range of experiments – from commercial pouches to cutting-edge solid-state batteries. This module delivers the accuracy and flexibility crucial […]
Thickness Sensor Module – Pouch Cell Holder
The Thickness Sensor Module from Wattcrafts works with their pouch cell holder to capture battery cell volume changes with its ultra-precise thickness sensor. Designed for advanced battery R&D, this module provides unprecedented insights into electrode expansion, swelling, and mechanical deformation across diverse battery technologies.