PAT-Stand-16
The PAT-Stand-16 is the docking station for up to 16 PAT-Cells in 4 x 4 matrix. The PAT-Stand-16 has a built-in data logger recording full and half cell voltages, cell current, tray temperature and time. The PAT-Stand-16 can be connected permanently to a usual multi-channel potentiostats (such as those from Biologic or Ivium) or battery […]
EL-Cell Metal Seal Mounting Kit
Tool kit for using metal seals in PAT series test cells EL-CELL offers metal sealing rings for PAT series test cells for highest demands on cell tightness. This tool kit is designed to ensure the correct installation when using these metal seals. The handy assembly block holds the cell in place, while the torque wrench […]
ECD-4 Nano Dilatometer
The ECD-4-nano takes dilatometry measurements to the next level The ECD-4-nano is a high-resolution electrochemical dilatometer. The most powerful version offers a capacitive parallel plate sensor system with a resolution of better than 5 nanometers. This makes the ECD-4-nano the perfect instrument for detecting thickness changes of the individual electrode or the full cell stack […]
ECC-StopRail
EL-Cut attachment to reduce scrap from cutting. Don’t waste your precious electrode material! When attached to the cutting pliers, the crosshairs of the ECC-StopRail let you precisely target the electrode area. The ECC-StopRail is an optional tool to be attached to the EL-Cut cutting pliers. The ECC-StopRail is a means to conveniently target the cutting area. […]
EL-Cut
Accuracy and reproducibility of electrochemical tests do not solely depend on the choice of materials but also on simple geometric and mechanical parameters. The proper cutting of the electrodes is an often neglected factor. Torn and chipped electrode edges – although invisible to the bare eye – inevitably cause current inhomogeneity and are thus likely […]
ECC-LiPunch
Punching tool for lithium foil Forget about your lithium foil getting stuck to the hollow punch! The ECC-LiPunch is the perfect tool for smoothly punching 18 mm lithium discs for the ECC and PAT series test cells. For punching highly precise and flat lithium discs Standard size for EL-CELL test cells: 18 mm diameter Other […]
PAT-Chamber-16
The patented1 PAT-Chamber-16 combines the high-throughput testing abilities of the PAT-Stand-16 with a temperature-controlled cell chamber. The integrated Peltier device enables you to test at the exact temperature you need, without using an external heat chamber. Furthermore, it is our first high throughput docking station that is capable of utilizing both the PAT-Cell and the PAT-Cell-Press […]
PAT-Heater-4
The PAT-Heater-4 is a heated docking station connecting up to 4 PAT-Cell-HT to any potentiostat or battery tester. The working temperature is adjustable from 10°C above ambient temperature up to 200°C. The PAT-Heater-4 saves wiring effort, because it is not necessary to renew the connection between cell and potentiostat for every battery test. However the easy-to-access […]
ECC-RefLoad
Tool for loading reference materials such as lithium metal into ECC-Opto-Std, ECC-Opto-SBS and ECC-Aqu test cells. Basically, the tool is a small tube (cannula) with a knock-out pin inside. A tiny piece of lithium metal is first picked up by pressing the cannula onto a piece of lithium foil (>0.2 mm thick). The cannula is […]
PAT-Stand-4
The PAT-Stand-4 is a docking station connecting up to four PAT-Cells to any potentiostat or battery tester. The connection is made via the banana sockets at the side of the PAT-Stand-4. The PAT-Stand-4 saves wiring effort, because it is not necessary to renew the connection between cell and potentiostat for every battery test. If you […]