PalmSens4
The PalmSens4 is a USB and battery powered Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The PalmSens4 has a large potential range (-5V to 5V or -10V to 10V) and current range (100 pA to 10 mA) with a high resolution and low noise. The PalmSens4 is equipped with an […]
885 Fuel Cell Potentiostat
Scribner Associates extends its ground-breaking line of tabletop fuel cell testing equipment with the 885 Fuel Cell Potentiostat. The 885 bolts directly to the 850 Multi-Range Fuel Cell Test Systems or 890e / 890C / 890ZV Fuel Cell Test Loads. This, together with Scribner’s FuelCell software results in an integrated and efficient fully automated testing […]
HiMUX.XR and uMUX
The HiMUX is an 8 channel multiplexer providing 8 independent channels, each with 5 electrodes and for use with compatible Ivium potentiostats. Up to 8 units can be linked together to up to 64 channels. Two models are available: the uMUX is a standard relay multiplexer: HiMUX.XR includes active circuity to minimise transients due to […]
PalmSens MultiEmstat4
The MultiEmstat4 incorporates 8 x individual Emstat4 potentiostats, each with EIS and galvanostat in a single compact chassis. The Emstat4 channels can be operated independently or in synchronised, multichannel experiments using PalmSens’s MultiTrace Software. The system may also be used as a polypotentiostat: multiple WE’s vs one CE and RE. (more) Each channel is an […]
MultiPalmSens4
The MultiPalmSens4 is a multi-channel potentiostat, galvanostat and impedance analyzer based upon the popular PalmSens4 potentiostat. The included MultiTrace software provides for channels to run individual, asynchronous experiments or to run synchronously. Each channel can be configured with: ±5 V or ±10 V maximum potential range EIS/FRA with maximum frequency of 100 kHz or 1 […]
Emstat4 Series
The EmStat series of laboratory potentiostats is based upon PalmSens’s highly successful, single-board Emstat potentiostat which has been used for many years in academia and industry for research and teaching applicatons. Instruments in this range offer current ranges from 1 nA (resolution of 0.92pA) to 200 mA. The EmStat4S comes in two different versions: Low […]
IviCycle
High Channel Count Cycler with EIS per Channel The IviCycle is a multi-channel test system with optional impedance capability. The channels are divided over 4 channel modules which can be a mix of the different IviCycle modules to create the desired number of channels with varying compliance. Modules are available either as a DC version […]
Vertex Range
Affordable solution The Vertex is a range of entry level potentiostats/galvanostats with optional FRA/EIS and optional I/O port. The robust design, the variety of available power configurations, the floating operation, and the availability of a wide range of electrochemical techniques makes the Vertex ideal for many applications. Additional I/O included on most models (see table below). Allows […]
Ivium HE80 – 20V/80A Potentiostat
NEW! The HE80 is a single-quadrant potentiostat with integrated FRA/EIS. It is a unipolar device capable of +0.5 to +20V, and 0 to +80A, and has been specifically designed with electrolysers/hydrogen generation, battery charging, and electrodeposition in mind. Includes: Current compliance: 0 to +80A Voltage compliance: +0.5 to +20V FRA/EIS: 10µHz-10kHz.
OctoStat Series
Multichannel Potentiostats and Battery Cyclers The OctoStat series was designed for applications where multiple cells are operated in parallel for long periods of time, such as battery/fuel cell-testing, electrode development, biotechnology and corrosion. It is also a highly affordable, solution for applications requiring multiple simultaneous potentiostat/EIS measurements. Key features: 8-channel Potentiostat/Galvanostat/ZRA/FRA Models from 30mA […]