Ivium HE80
NEW! The HE80 is a single-quadrant potentiostat with integrated FRA/EIS. It is a unipolar device capable of +0.5 to +20V, and 0 to +80A, and has been specifically designed with electrolysers/hydrogen generation, battery charging, and electrodeposition in mind. Includes: Current compliance: 0 to +80A Voltage compliance: +0.5 to +20V FRA/EIS: 10µHz-10kHz.
Ivium XP High Power Potentiostats
Single Cell Research Grade Cell Test Hardware
Dual Area Fuel Cell Fixture
RPS Battery Pack Test System
A modern IGBT rectifier/inverter followed by a fast chopper is the basis of the RPS system. This technology allows energy recovery back to the power line whilst discharging, in combination with a fast response time and a low current ripple. The presence of a transformer guarantees the galvanic isolation from the power line. Given that […]
Cell Test System (CTS)
The BaSyTec CTS test systems are designed for single cell tests with voltages up to 6V and currents up to 5A (20A in parallel operation). The very compact design allows a standard table top system with 32 independent test channels. Each channel has an additional input for the cell temperature. The automatic dynamic range switching […]
XCTS Mk2 Series
The BaSyTec XCTS series is designed for single cells with a maximum voltage of 6 V and currents up to 40, 60 or 80A. The amplifiers use switched technology which results in low heat generation, compact design and high overall energy efficiency. In parallel mode (optional) up to 800A can be reached. The XCTS has […]
Electroflow ETS20
The ElectroFlow ETS20 from Oxford nanoSystems is a state-of-the-art, fully integrated system designed for comprehensive laboratory R&D testing and analysis of electrolyser cells. This advanced test station provides precise control, measurement, and data acquisition, making it ideal for evaluating and comparing cell performance under controlled conditions. See also the Electroflow MTF Multi-cell Electrolyser Test Fixture.