ECC-StopRail
EL-Cut attachment to reduce scrap from cutting. Don’t waste your precious electrode material! When attached to the cutting pliers, the crosshairs of the ECC-StopRail let you precisely target the electrode area. The ECC-StopRail is an optional tool to be attached to the EL-Cut cutting pliers. The ECC-StopRail is a means to conveniently target the cutting area. […]
ECC-LiPunch
Punching tool for lithium foil Forget about your lithium foil getting stuck to the hollow punch! The ECC-LiPunch is the perfect tool for smoothly punching 18 mm lithium discs for the ECC and PAT series test cells. For punching highly precise and flat lithium discs Standard size for EL-CELL test cells: 18 mm diameter Other […]
PAT-Stand-4
The PAT-Stand-4 is a docking station connecting up to four PAT-Cells to any potentiostat or battery tester. The connection is made via the banana sockets at the side of the PAT-Stand-4. The PAT-Stand-4 saves wiring effort, because it is not necessary to renew the connection between cell and potentiostat for every battery test. If you […]
ECC-RefLoad
Tool for loading reference materials such as lithium metal into ECC-Opto-Std, ECC-Opto-SBS and ECC-Aqu test cells. Basically, the tool is a small tube (cannula) with a knock-out pin inside. A tiny piece of lithium metal is first picked up by pressing the cannula onto a piece of lithium foil (>0.2 mm thick). The cannula is […]
PAT-Cell
The ideal test cell for high-throughput battery testing. The PAT-Cell is a test cell for 2- and 3-electrode measurements on battery materials. It uses the modular PAT-Core concept and can therefore be used for a variety of test purposes. The cell has no wiring but is inserted directly into a PAT battery tester or connected to any commercially available […]
PAT-Cell-Twin-Ref
The PAT-Cell-TwinRef is a special version of the PAT-Cell which accommodates the use of a second reference electrode. This enables simultaneous measurements using two reference electrodes, for instance with LFP and LTO. Since both ring electrodes are arranged face-to-face, their SOC can be easily adjusted.
PAT-Cell-HT
For 2- & 3-electrode testing at elevated temperatures The PAT-Cell-HT is a test cell for 2- and 3-electrode measurements on battery materials at temperatures up to 200°C. It uses the modular PAT-Core concept and can therefore be used for a variety of test purposes. The cell has no wiring but is inserted directly into a PAT battery tester or […]
PAT-Cell-Gas
For In-Situ Gas Analysis Developed for in-situ gas analysis of battery materials in a flow-through set-up, the PAT-Cell-Gas features a gas inlet and outlet with self-locking couplings that are compatible with 1/16 in. Swagelok tube fittings. Optional built-in pressure sensor or valve port for gas sampling with a syringe are also available. The PAT-Cell-Gas combines […]
PAT-Cell-Press
For testing under pressure The PAT-Cell-Press is a pressure test cell for measuring gas evolution and drawing gas samples (option). Its advanced design includes a laser welded pressure sensor and glass-to-metal seals. The number of non-permanent seals is reduced to its minimum: a single seal between cell lid and base and a ferrule when the […]
XR Series Power Supplies
XR Series DC Power, 2kW to 10kW. 2U.
5VDC to 1000VDC. To 250ADC.
39 Models in the range.