ALx Series DC Electronic Loads
The ALx Series MagnaLOAD utilizes conventional linear MOSFET-based dissipative elements, allowing the series to achieve a very wide voltage-current operating range within the model’s maximum power rating
NanoCycler – Battery Cycler
Despite the fact that advanced battery research starts with coin cells, most standard battery cyclers are optimised for testing large cells such as 18650 cells. To meet the need for lower-current, low-cost cycling in the sub-10mA / 100mA region, we are pleased to offer the NanoCycler from Nanobase, Inc. NanoCycler comes complete with easy-to-use software […]
IviCycle
The IviCycle is a multi-channel test system with optional impedance capability. The channels are divided over 4 channel modules which can be a mix of the different IviCycle modules to create the desired number of channels with varying compliance. Modules are available either as a DC version (no EIS), or as an EIS version with […]
Ivium HE80
NEW! The HE80 is a single-quadrant potentiostat with integrated FRA/EIS. It is a unipolar device capable of +0.5 to +20V, and 0 to +80A, and has been specifically designed with electrolysers/hydrogen generation, battery charging, and electrodeposition in mind. Includes: Current compliance: 0 to +80A Voltage compliance: +0.5 to +20V FRA/EIS: 10µHz-10kHz.
OctoStat Series
Multichannel Potentiostats and Battery Cyclers The OctoStat series was designed for applications where multiple cells are operated in parallel for long periods of time, such as battery/fuel cell-testing, electrode development, biotechnology and corrosion. It is also a highly affordable, solution for applications requiring multiple simultaneous potentiostat/EIS measurements. Key features: 8-channel Potentiostat/Galvanostat/ZRA/FRA Models from 30mA […]
RPS Battery Pack Test System
A modern IGBT rectifier/inverter followed by a fast chopper is the basis of the RPS system. This technology allows energy recovery back to the power line whilst discharging, in combination with a fast response time and a low current ripple. The presence of a transformer guarantees the galvanic isolation from the power line. Given that […]
Cell Test System (CTS)
The BaSyTec CTS test systems are designed for single cell tests with voltages up to 6V and currents up to 5A (20A in parallel operation). The very compact design allows a standard table top system with 32 independent test channels. Each channel has an additional input for the cell temperature. The automatic dynamic range switching […]
XCTS Mk2 Series
The BaSyTec XCTS series is designed for single cells with a maximum voltage of 6 V and currents up to 40, 60 or 80A. The amplifiers use switched technology which results in low heat generation, compact design and high overall energy efficiency. In parallel mode (optional) up to 800A can be reached. The XCTS has […]