Electrolysis Cell Fixture
Scribner’s Electrolysis Cell Fixture is specifically designed for their 600 / 620 Water Electrolysis Test Stations. Choose Red or Blue End-Plates – Both use the Pt-Ti flow field on the Positive Side and Graphite flow field on the Negative Side. The difference is in the End-Plates: Blue End-Plates are suitable for DI water Red End-Plates […]
Electroflow MTF Multi-cell Electrolyser Test Fixture
The ElectroFlow MTF is a multi-cell electrolyser test fixture that is fully compatible with the ElectroFlow ETS20. The advanced design of the ElectroFlow MTF supports concurrent operation and testing of multiple electrolyser cells. Available in two sizes (4.9cm2 and 15.9cm2 active cell areas), the ElectroFlow MTF enables evaluation and performance comparison of key components, such […]
PAT-Clamp-1
Docking Station with Minimised Dimensions The PAT-Clamp-1 is our smallest docking station for a single PAT test cell. It was developed for tight space constraints. The socket can be left connected permanently to a common potentiostat or battery tester using 2 mm banana sockets or Sub-D connector. Therefore there is no need to renew the […]
PAT-Stand-1
The PAT-Stand-1 is a docking station, which runs a single PAT-Cell or PAT-Cell-Press. It can be connected directly to a common multi-channel potentiostat (such as those from Ivium or PalmSens) or battery testers (like Ivium or BaSyTec) using 4mm banana sockets or a hardwired Sub-D socket. Therefore, the PAT-Stand-1 saves wiring effort, because it is […]
ECC-CellLoad
Electrode alignment and assembly tool When building full cells with thin Celgard type separators, the concentric alignment of the two electrodes – with the oversized separator in between – is the key for electrochemical performance and life time. The ECC-CellLoad is the tool to get that done easily. This tool is suitable for test cells […]
PAT-Stand-16
The PAT-Stand-16 is the docking station for up to 16 PAT-Cells in 4 x 4 matrix. The PAT-Stand-16 has a built-in data logger recording full and half cell voltages, cell current, tray temperature and time. The PAT-Stand-16 can be connected permanently to a usual multi-channel potentiostats (such as those from Biologic or Ivium) or battery […]
EL-Cell Metal Seal Mounting Kit
Tool kit for using metal seals in PAT series test cells EL-CELL offers metal sealing rings for PAT series test cells for highest demands on cell tightness. This tool kit is designed to ensure the correct installation when using these metal seals. The handy assembly block holds the cell in place, while the torque wrench […]
ECD-4 Nano Dilatometer
The ECD-4-nano takes dilatometry measurements to the next level The ECD-4-nano is a high-resolution electrochemical dilatometer. The most powerful version offers a capacitive parallel plate sensor system with a resolution of better than 5 nanometers. This makes the ECD-4-nano the perfect instrument for detecting thickness changes of the individual electrode or the full cell stack […]
PAT-Heater-4
The PAT-Heater-4 is a heated docking station connecting up to 4 PAT-Cell-HT to any potentiostat or battery tester. The working temperature is adjustable from 10°C above ambient temperature up to 200°C. The PAT-Heater-4 saves wiring effort, because it is not necessary to renew the connection between cell and potentiostat for every battery test. However the easy-to-access […]
IviumSoft
Ivium Potentiostats are controlled by IviumSoftTM Electrochemistry Software, provided free of charge. Developed by Ivium engineers, IviumSoft is feature-rich, yet intuitive. It is used for both data acquisition and data analysis, and controls the potentiostat for a broad range of electrochemical techniques. IviumSoft also includes a wide range of data evaluation and analysis tools. IviumSoft […]