HiMUX.XR and uMUX
The HiMUX is an 8 channel multiplexer providing 8 independent channels, each with 5 electrodes and for use with compatible Ivium potentiostats. Up to 8 units can be linked together to up to 64 channels. Two models are available: the uMUX is a standard relay multiplexer: HiMUX.XR includes active circuity to minimise transients due to […]
Peripheral Port Interfacing (PPE & PDA)
The Peripheral Port Expander (PPE) and Peripheral Differential Amplifier (PDA) offer easy connectivity to the D-type connector on the integrated peripheral port included on Ivium potentiostats. The PPE is a passive interface used purely for easy connection whereas the alternative, the PDA, includes floating, high impedance differential inputs suitable for connection to additional electrodes or […]
Ivium Low Current (LC) Module
The Low Current module (LC module) adds 3 real current ranges below the existing current ranges of the Ivium potentiostat to which it is connected. These additional current ranges are available for potentiostatic measurements. It is an analog module and is compatible with almost all Ivium potentiostats, including the 24bit instruments. For example, the IviumStat […]
Ivium CE Link
The CE link module enables the combination of 2 or more Ivium potentiostats in a single cell with shared counter electrode without galvanic isolation. Placing the CE link between potentiostat and cell avoids the need for floating operation of one (or more) of the channels. This avoids the risk of high common mode voltages, or […]
PalmSens Electrochemistry Software
PSTrace PC Software PSTrace software is shipped as standard with the PalmSens, Emstat and EmstatMUX instruments. The software provides support for all techniques and device functionalities. With a smooth simple interface, showing only the applicable controls, PSTrace is suitable for all levels of user experience. MultiTrace: Multichannel Software MultiTrace provides the functionality of PSTrace but […]
Digisim® Simulation Software For Cyclic Voltammetry
Cyclic voltammetry can readily provide qualitative information about the stability of the oxidation states and the electron transfer kinetics of a redox system. However, quantitative studies using cyclic voltammetry (e.g., mechanistic investigations) are more difficult and typically require the use of simulation software. A number of methods have been developed for the simulation of cyclic […]