Tools
EL-Cut
High precision cutting pliers to eliminate torn and chipped electrode edges.
- Perfectly cut electrodes
- Electrode thickness: max. 300 μm (for coatings on Al and Cu foil (may vary for other support materials))
- Available diameters of the cutting tool range from 6 to 40 mm. Different shapes (e.g. squared) are available on request
ECC-StopRail
Attachment for the EL-Cut to speed up the cutting process and reduce cutting scrap.
- Compatible to any EL-Cut diameter up to 22 mm
- Very easy assembling to El-Cut, no tools required
ECC-LiPunch
Punching tool for lithium foil.
- For punching precise and flat lithium discs
- Standard size for EL-CELL test cells: 18 mm
Other sizes available on request
ECC-RefLoad
Tool for loading reference materials such as lithium metal into ECC series test cells .
- Suitable for ECC-Ref, ECC-Combi, ECC-Air(-Ni), ECC-DEMS, ECC-Press(-DL), ECC Press-Air(-DL) ECC-Press-Aqu(-DL), ECC-Press-Air-Aqu(-DL), ECC-Opto-Std, ECC-Opto-SBS
- Ref cleaning toll set available
ECC-CellLoad
Electrode alignment and assembly tool
- Highly precise alignment of the two electrodes
- Suitable for electrodes of 18 mm diameter
- Easy handling
- Suitable for ECC-Std and ECC-Press-Air(-DL)
Metal seal mounting kit
Tool kit for using metal seals in PAT series test cells
